Thank you so much for your involvement with the Owner's Club Forum! We hope you've gotten some great information and had the chance to interact with other owners on the current system.
location of fuses
jwhamblet
Member Posts: 2 ✭
Comments
-
You don't have any fuses on your boat (for most things) Under each switch is a small button with a number indicating the amperage of the circuit breaker for each circuit. This way, if you trip it, you can reset it and be underway (pending no problems)There are still a few fuses (like the one for the constant power to the float switch of your bilge pump) but for the SS188, its all breakers.Hope this helps.------------------------------------------------------------------------------2010 Hurricane SS 188 OB
2010 Mercury Optimax 200HP / Mercury SS High Five 19P
2010 Trailmaster SC trailer -
Thanks. The manual isn't much help.
-
I have fuses on my 2007 Hurricane FD226RE and it has fuses. I am chasing down an electrical problem right now. I have engine start power and tilt/trim. Everything else is dead. All accessories, gauges, lights depth finding.....everything. Replaced the relay. Nothing!! Will report on final solution. Any ideas?
-
gbarboza again
replaced two 30 amp fuses and one 5 amp (all that I could find in the battery compartment) nothing changed. Everything still out. Replaced relay under the helm. Nothing changed. Are there breakers and where are they.
-
gbarboza, my hurricane is doing the exact same thing. Can you share how you fixed it? My boat fires right up and runs fine, but the master won't turn on any accessories. Horn doesn't work either.
-
any update on these issues guys?1999 Hurricane Fundeck 226 (Sold)
2008 Hurricane Fundeck GS202 (Sold)
2023 Sundeck 2400 OB (Current) -
I am in the same "boat". This past weekend start/trim/tach/mph all work. Nothing else. All battery connections seem fine. I believe there are in-line fuses in some of the battery lines - was going to check. Anyone have update on the above?
2003 Sundeck 217
Yamaha 225
2017 Venture Trailer -
Any fix for this. Same
issues. Relay didn’t fix
it. -
Old thread but here’s my fix. I had a corroded fuse in the PED fuse connector coming off the battery.