Thank you so much for your involvement with the Owner's Club Forum! We hope you've gotten some great information and had the chance to interact with other owners on the current system.
Engine Hatch
jesse.bolton
Member Posts: 4 ✭
My Engine hatch is closed, very tight and will not open? Is there anyway to release it?
12 Volt to Switch and 12 volts going out of switch on Green and Yellow Wire.
Hurricane 2013 Sundeck Sport 202 I/O
Tks Jesse B.
Comments
-
Jesse, I just contacted my dealer to ask what he would do in your situation as I don't have experience with power operated hatches, here's what he sent me:
"Try either the small tub on rear to reach pull pin to release the hatch or also make sure there is power at the dash for switch first. With out looking at access plates on boat this would be my first steps."
Hope that helps!2012 SD237 I/O Mercruiser 5.0L MPI ECT/ Bravo 32012 Load Rite Elite Tandem axle trailer -
Just got another message from my dealer. He said that maybe one of the 4" vents may be near enough to where the pin is to remove it as well. Those vents can be pried out to gain access. Hope you have skinny arms!
2012 SD237 I/O Mercruiser 5.0L MPI ECT/ Bravo 32012 Load Rite Elite Tandem axle trailer -
Tks.. We are going to try to jump the switch and see if switch is out.. Getting in there to pull the pin is difficult (not to mention, the hatch has pressure on it which makes it extremely hard to remove).. But I have a plan.. Tks for the help...
-
Let us know how you made out!2012 SD237 I/O Mercruiser 5.0L MPI ECT/ Bravo 32012 Load Rite Elite Tandem axle trailer
