Thank you so much for your involvement with the Owner's Club Forum! We hope you've gotten some great information and had the chance to interact with other owners on the current system.
need to remove the top cap for transom repair is there anything else holding the cap other than the
cooter
Member Posts: 5 ✭
screws around the outside 93 fundeck will all the railing need to come off and are there pick up points
Best Answers
-
I have a '92, here's a link to my photobucket album, start at last page and work forward: http://s374.photobucket.com/user/SkoolWheelz/library/Deck Boat?sort=3&page=1 Wiring, fuel fill/vent lines, helm/steering to mention a few additional items. If replacing the transom, I'd replace at least a couple feet of the stringers attached to it, but be sure and check all of them, as well as the sheeting under the deck, mine was completely rotted.
-
my stringers are good but was thinking of doing a couple braces just for good measure. does anybody know for sure transom wood thickness 3/4 x 2 in places at seems a little thick.
Answers
-
Mine took 2-3/4" pieces, plus an additional 1/2" where the motor bolts on. They had used a material (looked like mortar-mix) which I had to remove when rebuilding mine.
Think about this, if your transom soaked-up water, and the stringers are fitted to the transom, some of that water was wicked into the stringers. I'd rather do it now, than wished later-on I'd have done it. -
I really need to get a question on my hurricane deck boat restoring project. Can someone help me?
-
i just completed the 87 cajun 8-month projects i recommend use sea-cast after replacing all the bad stringers its actually bulletproof and floats you wont regret it
