Thank you so much for your involvement with the Owner's Club Forum! We hope you've gotten some great information and had the chance to interact with other owners on the current system.
SD2000 Navigation lights not working
amayarose
Member Posts: 12 ✭✭
Request wiring schematic for 2015 SD2000.
issue- 12v at helm rocker switch missing when switch is placed in either “nav” or “anchor” position. Believe I have a short to ground from somewhere in the panel area. I’m have replaced the switch with new one - same indications. I have checked all three lamps (port, strbd, anchor). All good there. I have disconnected all three lamps at the lights, no change of indications. All the indications point to problem in helm area, just not sure if I have problem with ground wire or positive wire. With switch placed in neutral pos 12. Volts's is present, when switched to any of the other two positions 12 volts goes away.
issue- 12v at helm rocker switch missing when switch is placed in either “nav” or “anchor” position. Believe I have a short to ground from somewhere in the panel area. I’m have replaced the switch with new one - same indications. I have checked all three lamps (port, strbd, anchor). All good there. I have disconnected all three lamps at the lights, no change of indications. All the indications point to problem in helm area, just not sure if I have problem with ground wire or positive wire. With switch placed in neutral pos 12. Volts's is present, when switched to any of the other two positions 12 volts goes away.
Comments
-
The nav ckt brkr under the helm was jumpered our and all lights work. Will need to order and replace brkr