Thank you so much for your involvement with the Owner's Club Forum! We hope you've gotten some great information and had the chance to interact with other owners on the current system.

Multiple electrical issues with my 2015 SD217

wklinnc
wklinnc Member Posts: 3 ✭
in Electrical System Discussions
I have acquired a new to me 2015 SD217 with a 150 Yamaha. Some of my switches do not function. No Nav lights, no horn. My bilge pump runs constantly. All but one of the circuit breakers appear to be frozen. I believe I need to see the wiring diagrams for this boat which will hopefully include component locations such as main relays and / or fuse locations. Anyone who could provide this info, I would be greatly appreciative.
· Share on Facebook

Answers

  • Tejas_Rick
    Tejas_Rick Member Posts: 2 ✭
    I recently purchased a 2009 hurricane 237. The only thing working on the dash was the fuel gauge and the voltage gauge. I took the screws out of the lower switch panel, pulled it out far enough to reach all of the connectors, and inspected/reseated as many connectors as I could find. The culprit was the master power switch on the far left. And it was either that switch, or it wasn’t getting power from the ignition switch. I reseated the ignition switch round harness also, that could’ve been the issue. The only thing that didn’t come to life is my tachometer, tilt gauge, and alarm buzzer. I think my alarm buzzer is broken, I’ve ordered another one. I still got to chase down the problem with the tack and the tilt. Taking my time, it took me about an hour. It was very encouraging when the dashboard lit up.
    · Share on Facebook
  • Tejas_Rick
    Tejas_Rick Member Posts: 2 ✭
    Forgot to mention, the 237 has a Yamaha 225.
    · Share on Facebook
  • wklinnc
    wklinnc Member Posts: 3 ✭
    Thank you for the post. I have done some further investigation and did find an issue with power to the master power switch as well. Getting power to that switch did solve many of my issue. I now have nav lights and a horn. However, I do believe most of my circuit breakers are frozen and need replacement. I don't have a way of knowing replacement amperage with an accurate wiring diagram. At this point that is what I am most in need of.
    · Share on Facebook
  • wklinnc
    wklinnc Member Posts: 3 ✭
    I anyone can help out with a wiring diagram for a 2015 SD217 I would be very grateful.
    · Share on Facebook

Categories