Thank you so much for your involvement with the Owner's Club Forum! We hope you've gotten some great information and had the chance to interact with other owners on the current system.
How do I replace the freshwater shower pump on the SD187 o/b? Pump operates but does not discharge.
obxskiff
Member Posts: 2 ✭
How do I replace the freshwater shower pump on the SD187 o/b? Pump operates but does not discharge water. There does not appear to be any easy way to access the pump.
Thank you for any help or direction with this matter.
RT on the NC Outer Banks
Best Answer
-
@obxskiff, its a tough reach but accessible via the bilge (you may need 4 ft arms unfortunately)You mentioned it runs and doesn't discharge. Either something is blocking the intake on the pump (remove pump from house, clean and reseat) or there is a blockage in the discharge hose. Sometimes just blowing air into the discharge hose loosens the debris and away you go. I've done it by simply putting my mouth over the opening and giving it long bursts of air.------------------------------------------------------------------------------2010 Hurricane SS 188 OB
2010 Mercury Optimax 200HP / Mercury SS High Five 19P
2010 Trailmaster SC trailer
Answers
-
Thanks, you are correct, 4 foot arms would help. I will try your other suggestion and hope that will do the trick.
-
Hi obxskiff. Somebody response your question?. Or how you replace the pump , I have a SD 188ob 2002 with the same problem. Thanks.
