Thank you so much for your involvement with the Owner's Club Forum! We hope you've gotten some great information and had the chance to interact with other owners on the current system.
navigation stern light male plug
mjowens
Member Posts: 9 ✭✭
can anyone give me information for replacing the male end on wiring that runs through Bimini poles to plug in back side of boat on my 2012 ss211 center helm hurricane. Got a Perko connector (both ends) from West Marine - catalog # 1189DP099A. It was too small. Need the the correct manufacturer, item # and place I can I can purchase. Thanks, Mike
Best Answer
-
I think it might be the Seadog 4261441.
Answers
-
Following up.......this deck plug connector plug I need is for the old style Atwood white standup navigation light. Thx, Mike
-
-
Here is a picture of plug
-
I replaced the ends with a set of connectors that battery chargers use. I dont have a pic but its a pair of 3/8 x 1 or so flat male/female plugs with wired ends. One can get them at an auto supply store
-
Thanks for your reply. Would like to still find the male plug connector in lieu of a Jerry rig. The female is in good order and would have to be drilled out as it is rivited in.
-
I have to order the same plug since all i have is the 2 wires hanging loose. There is a small hole and a larger hole for the pin connectors. Can someone tell me what color wire goes to which pin?
-
I believe the base of the connector where you attach the wires will indicate + & - locations.
Navigation lights will have either a solid gray or gray with a stripe color as the positive wire. Black or Yellow will indicate negative.
2012 SD237 I/O Mercruiser 5.0L MPI ECT/ Bravo 32012 Load Rite Elite Tandem axle trailer
