Thank you so much for your involvement with the Owner's Club Forum! We hope you've gotten some great information and had the chance to interact with other owners on the current system.

Stainless Prop for 201 Fundeck with Yamaha 115

Frankh27
Frankh27 Member Posts: 4 ✭
in General Discussions
My Yamaha 115 has an old aluminum prop and I would like to replace it with a stainless prop.

Can anyone recommend the correct size SS prop?  The boat and motor are both year 2000 (Yamaha is 2-stroke).  Thanks!
· Share on Facebook

Answers

  • thurricane
    thurricane Administrator Posts: 637 admin
    you could check with a local prop shop for this comparison .  Yamaha does not fit with a SS prop until 150 HP
    · Share on Facebook
  • Frankh27
    Frankh27 Member Posts: 4 ✭
    Good suggestion.  I'll definitely try that.  Thanks.  Still wondering if anyone has already done it to get their "lessons-learned" feedback.
    · Share on Facebook
  • Gward
    Gward Member Posts: 8 ✭
    I’m looking for the same, currently have. 2012 187SD WITH A 115 HP running an aluminum 13 1/4 x 17K prop. It does not come out of the hole very well. I’m able to run WOT around 6500 at about 31 mph. Any suggestions on a prop for me.
    · Share on Facebook
  • cjjjdeck
    cjjjdeck Member, Moderator Posts: 1,871 ✭✭✭✭
    You may need to change over to a 4 blade prop to get better hole shot.  The good news is that Yamaha (if you have a Yamaha) has a great "prop selector" website.   You may want to visit it and plug in some numbers: http://www.yamahapropselector.com/propSelector/web/

    2012 SD237 I/O Mercruiser 5.0L MPI ECT/ Bravo 3
    2012 Load Rite Elite Tandem axle trailer

    · Share on Facebook

Categories