Cup Holders

instymp

I think I bought mine from amazon, per the recommendations above & like them a lot. They came with 2 sided tape under the lip that sits on the surface you are mounting to to secure them. They were a standard size as the white plastics that came with it & blow out when towing.

cjjjdeck

DavidPJ said:

Thanks cjjdeck. Do you know if the cup holder holes in your boat are 3-3/4 inches? Looks like a nice cup holder.

I haven't pulled any of the cup holders from the hull to actually measure the hole size, but I have 4 1/4" measurement across the top of mine and the drawing on ITC's website shows a dimension of 3.662" at the base of the cup holder.  I would imagine the hole size is easily 3 3/4".  That leaves a 1/4" lip around the edge for the foam tape to seal to.

DavidPJ

instymp said:

I think I bought mine from amazon, per the recommendations above & like them a lot. They came with 2 sided tape under the lip that sits on the surface you are mounting to to secure them. They were a standard size as the white plastics that came with it & blow out when towing.

Thanks instymp. I can't find anything in this thread that indicates which cup from Amazon was being referred to in the above posts. Is this the one you have?
http://www.amazon.com/Amarine-made-Stainless-Holder-Marine-Camper/dp/B0097MF4DU/ref=sr_1_2?ie=UTF8&qid=1438110919&sr=8-2&keywords=stainless+steel+cup+holders+for+boats

DavidPJ

cjjjdeck said:

DavidPJ said:

Thanks cjjdeck. Do you know if the cup holder holes in your boat are 3-3/4 inches? Looks like a nice cup holder.

I haven't pulled any of the cup holders from the hull to actually measure the hole size, but I have 4 1/4" measurement across the top of mine and the drawing on ITC's website shows a dimension of 3.662" at the base of the cup holder.  I would imagine the hole size is easily 3 3/4".  That leaves a 1/4" lip around the edge for the foam tape to seal to.

cjjdec, looks like it will fit. I'm trying to avoid the hassle of buying/returning any more cup holders until I have a good confidence level that it's going to fit this time. The ITC cup looks it would fit but I wonder if it might be too loose. I like the 316 stainless steel choice. I guess I'll never know for sure until I try one. Thanks again.

instymp

David, yes
http://www.amazon.com/gp/product/B0097MF4DU?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00

DavidPJ

instymp said:

David, yes
http://www.amazon.com/gp/product/B0097MF4DU?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00

Thanks instymp.